Creedon MITL Ver.2

Home Up

Jump to:  MITL Attributes    Output Format   Definition     Notes

Calculate MITL Attributes:              top

Parameter       

Value

Units

Special Values 

Inputs:

Voltage, VMITL [kV]   
Self-Limited Impedance, ZImin [Ω]   

(optional)  

Under-Matched Load Impedance, ZLoad [Ω] An alternate version of this page uses ZBoundary as an input.

   <- - Press button to calculate outputs.

Outputs:   

Vacuum Impedance, Zvacuum [Ω]    
Anode Current, IA

[kA]
  Boundary Current, IBoundary [kA]
  Sheath Current, ISheath [kA]    
  Boundary Impedance, ZBoundary [Ω]    
       
       
           

Outputs (for optional under-matched load):

Anode Current, IA

[kA]    
Boundary Current, IBoundary [kA]    
Sheath Current, ISheath [kA]    
  Boundary Impedance, ZBoundary [Ω]    
       

 

Output Format:                                                        top

Select Format: Scientific Engineering Fixed

 

Definition:                                                                top                 

Equations

Parameters

Diagram

 

Notes:                                                                       top

bulletEquations hold for coaxial, stripline, and conical transmission lines.  Diagram shows a coaxial line.
bulletEquations hold for positive and negative polarity (negative polarity shown in diagram), but do not hold in the case of a positive polarity MITL (because of the layered flow resulting from emission from each of the feed cells).
bulletSources:
bulletJ. M. Creedon,  Appl. Phys. 48, 1070 (1977).
bulletCreedon JM. J Appl Phys 1975; 46: 2946-2955.

 

Copyright ©2005  Raymond J. Allen